Canon 5251B001 User Manual Download Page 82

Page: 82 / 220

Changing the Tone of an Image (My Colors)

The contrast, sharpness, color saturation, red, green, blue, and skin tones in
an image can be chosen and set at 5 different levels.

Follow Step 2 on p. 81 to choose

, then

press the

button.

Press the

buttons to choose an

option, then press the

buttons or turn

the

dial to choose a value.

The more to the right, the stronger/darker
(skin tone) the effect gets, the more to the
left, the weaker/lighter (skin tone) the
effect gets.

Press the

button to complete the

setting.

My Colors Off

—

Vivid

Emphasizes the contrast and color saturation for a vivid
impression.

Neutral

Tones down the contrast and color saturation for neutral hues.

Sepia

Changes the image to sepia tones.

B/W

Changes the image to black and white.

Positive Film

Combines the effects of Vivid Red, Vivid Green and Vivid Blue
to produce intense natural appearing colors like those
obtained with positive film.

Lighter Skin Tone

Makes skin tones lighter.

Darker Skin Tone

Makes skin tones darker.

Vivid Blue

Emphasizes blue tints. Makes the sky, ocean and other blue
subjects more vivid.

Vivid Green

Emphasizes green tints. Makes mountains, foliage and other
green subjects more vivid.

Vivid Red

Emphasizes red tints. Makes red subjects more vivid.

Custom Color

You can adjust contrast, sharpness, and color saturation etc.
to your preference.

•

The white balance cannot be set in

and

(p. 80).

•

and

, colors other than people’s skin color may change. You

may not obtain the expected results with some skin colors.

Custom Color

COP

Summary of Contents for 5251B001





























































































































































































































Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands

Canon 5251B001, User Manual

Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands