Canon 5251B001 User Manual Download Page 46

Page: 46 / 220

Indicator

Choose [LCD Brightness].

Move the zoom lever to choose the

tab.

Press the

buttons or turn the

dial

to choose [LCD Brightness].

Adjust the brightness.

Press the

buttons to adjust the

brightness.

Press the

button twice to restore

the normal screen.

Press and hold the

button for more

than 1 second.

The screen increases to maximum
brightness (The settings made in [LCD
Brightness] in the

tab will be disabled).

Press and hold the

button again for

more than 1 second to return the screen to
the original brightness.

The indicator on the back of the camera (p. 39) will light or blink depending
on the camera’s status.

Using the

Button

•

The next time you turn on the camera, the screen will be at the brightness
setting chosen in the

tab.

•

When you have [LCD Brightness] set to its highest setting in the

tab,

you cannot adjust the brightness with the

button.

Indicator

Color

Status

Operation Status

Green

Lights

Camera on

Blinks

During camera start-up, recording/reading/transmitting image data

When the indicator blinks green, do not turn the camera off, open the

memory card slot/battery cover, shake or jolt the camera. These actions

may corrupt the image data or cause the camera or memory card to

malfunction.

COP

Summary of Contents for 5251B001





























































































































































































































Search results

Summary of Contents for 5251B001

Reviews:

Brands by name

Popular brands

Canon 5251B001, User Manual

Search results

Summary of Contents for 5251B001

Reviews:

Brands by name

Popular brands