Canon 5244B001 User Manual Download Page 98

Page: 98 / 236

Magnifying the Focal Point

If you press the shutter button halfway, the AF frame will magnify and you can
check the focus.

Choose [AF-Point Zoom].

Press the

button to choose [AF-

Point Zoom] in the

tab, then press the

buttons to choose [On].

Check the focus.

Press the shutter button halfway.

In [Face AiAF] (p. 94), the face detected as
the main subject will appear magnified.

In [FlexiZone] or [Center] (p. 95), the
contents of the AF frame will appear
magnified.

•

The spot AE point frame can be linked with the AF frame (p. 103).

•

You can also set the AF frame size by pressing the

button and

choosing [AF Frame Size] in the

tab.

•

The AF frame size is set to [Normal] when using the digital zoom (p. 50),
digital tele-converter (p. 93), or manual focus (p. 102).

Magnifying the Focal Point

What if the display does not magnify?

The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [FlexiZone] or [Center], it will not appear
magnified if the camera cannot focus.

The magnified display will not appear when using the digital zoom (p. 50),
digital tele-converter (p. 93), Tracking AF (p. 95), Servo AF (p. 99) or when
using a TV as a display (p. 192).

COP

Summary of Contents for 5244B001













































































































































































































































Search results

Summary of Contents for 5244B001

Reviews:

Related manuals for 5244B001

Brands by name

Popular brands

Canon 5244B001, User Manual

Search results

Summary of Contents for 5244B001

Reviews:

Related manuals for 5244B001

Brands by name

Popular brands