manualshive.com logo in svg

Canon 5157B002, Instruction Manual

Share
Download
Canon 5157B002 Instruction Manual Download Page 184

184

Basically, you can playback movies in the following three ways:

An HDMI cable (sold separately) is 
necessary to connect the camera to a 
TV set. The TV set must also have an 
HDMI terminal.

When the camera is connected to a TV 
set with an HDMI cable, you can 
playback movies and still photos on the 
TV set. If you use a High-Definition TV 
set to playback High-Definition (HD) 
movies shot with this camera, you can 
watch the movies in high definition.

k

 Enjoying Movies

Playback on a TV set

(p.191)

 

The camera does not have an audio/video OUT terminal. Therefore, the 
camera cannot be connected to a TV set with an analog AV cable.

 

Movies on a card can be played only by devices compatible with MOV 
files.

 

Since hard disk recorders do not have an HDMI IN terminal, the camera 
cannot be connected to a hard disk recorder with an HDMI cable.

 

Even if the camera is connected to a hard disk recorder with a USB 
cable, movies and still photos cannot be played nor saved.

Using HDMI Cable HTC-100 (sold separately) is recommended.

COP

Y

Summary of Contents for 5157B002





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands