Canon 5157B002 Page 148 Instruction Manual Download

Page: 148 / 292

Menu Function Settings

148

Sound recording

When the sound recording is set to [

], sound will be recorded by

the built-in monaural microphone. The sound recording level will be
adjusted automatically. An external microphone cannot be used.

Metering timer

You can change how long the exposure setting is displayed (AE lock
time).

Grid display

With [

Grid 1

] or [

Grid 2

], you can display grid lines. It can

help you level the camera vertically or horizontally.

The sound will be recorded at a 48 kHz sampling frequency and 16-bit
for both L and R.

The Metering timer and Grid display settings will also be reflected in Live
View shooting.

COP

Summary of Contents for 5157B002





































































































































































































































































































Search results

Summary of Contents for 5157B002

Reviews:

Related manuals for 5157B002

Brands by name

Popular brands

Canon 5157B002, Instruction Manual

Search results

Summary of Contents for 5157B002

Reviews:

Related manuals for 5157B002

Brands by name

Popular brands