Video
99
NOTES
• If the recording program is changed during exposure lock, the cam-
corder will return to automatic exposure.
• When shooting subjects with a strong light source behind them, the
camcorder automatically corrects for the backlight*. You can turn off the
automatic backlight correction with the
7
8
[Auto Backlight Cor-
rection] setting.
* Except in
mode when using a cinema-look filter other than [Cinema Stan-
dard].
Automatic Gain Control (AGC) Limit
When recording in dark surroundings, the camcorder will automatically
increase the gain to try to get a brighter picture. However, using higher
gain values may result in more noticeable video noise. You can select
the AGC limit to curb the amount of noise by setting the maximum gain
value to be used. The smaller the AGC limit, the picture will be darker
but will have less the noise.
* Touch [
z
Automatic] to remove the limit for the automatic gain control.
** You can also drag your finger along the dial.
• The selected AGC limit will appear on the screen.
Manual Focus Adjustment
Autofocus may not work well on the following subjects. In such case,
focus manually.
Operating modes:
[FUNC.]
8
[
P
AGC Limit]
8
[
y
Manual]*
8
[
y
] or [
A
]** to set the AGC limit
8
[
a
]
• Reflective surfaces
• Subjects with low contrast
or without vertical lines
• Fast moving subjects
• Through wet windows
• Night scenes
COP
Y
