Canon 5116B003 Instruction Manual Download

Page: 184 / 204

184

Additional Information

Maintenance/Others

Cleaning

Camcorder Body

• Use a soft, dry cloth to clean the camcorder body. Never use chemically

treated cloths or volatile solvents such as paint thinner.

Lens, Viewfinder (

only) and Instant AF

• If the lens surface or Instant AF sensor is dirty, autofocus may not work

properly.

• Remove any dust or dirt particles using a non-aerosol type blower

brush.

• Use a clean, soft lens-cleaning cloth to gently wipe the lens or view-

finder (

only). Never use tissue paper.

LCD Touch Screen

• Clean the LCD touch screen using a clean, soft lens-cleaning cloth.
• Condensation may form on the surface of the screen when the temper-

ature changes suddenly. Wipe it with a soft dry cloth.

Condensation

Moving the camcorder rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its internal surfaces.
Stop using the camcorder if condensation is detected. Continued use
may damage the camcorder.

Condensation may form in the following cases:

• When the camcorder is moved quickly from cold to warm places
• When the camcorder is left in a humid room
• When a cold room is heated rapidly

To avoid condensation

• Do not expose the camcorder to sudden or extreme changes in tem-

perature.

COP

Summary of Contents for 5116B003













































































































































































































Search results

Summary of Contents for 5116B003

Reviews:

Related manuals for 5116B003

Brands by name

Popular brands

Canon 5116B003, Instruction Manual

Search results

Summary of Contents for 5116B003

Reviews:

Related manuals for 5116B003

Brands by name

Popular brands