Video
109
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/
X
terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to
X
(headphones) output.
* Headphones can be used also in
mode but the function of the terminal can-
not be changed in this mode. Change the setting in advance in one of the other
operating modes.
1 Change the function of the terminal to headphones output.
* Only when performing the procedure in a recording mode.
2 Connect the headphones to the AV OUT/
X
terminal.
3 Adjust the volume as necessary.
** You can also drag your finger along the [Headphones] bar.
•
J
will appear on the screen.
To adjust the volume during playback
In
mode, and in
mode during slideshow playback, adjust
the headphones volume the same way you adjust the speaker’s vol-
ume (
0
57).
Operating modes:
*
[FUNC.]*
8
[MENU]
8
6
8
[AV/Headphones]
8
[Headphones]
8
[
f
]
[Volume]
8
[
c
] or [
d
]** to adjust the volume
8
[
a
]
COP
Y
