manualshive.com logo in svg

Canon 4K6021Z, User Manual

Share
Download
Canon 4K6021Z User Manual Download Page 81

79

Connection Procedure

Ins
tallation Guide

Co
n

ne

cti

on

 Pr
oc

ed

ur

e

Controlling the Projector from a Computer

The projector can be controlled from a computer over a wired or wireless network 
connection.

1

Turn on the computer and projector.

2

Launch a web browser, enter “http://(projector IP address)” in the 
address bar, and press the Enter key.

The projector web screen appears.

3

Click [Projector control] on the web screen.

The password input window appears.

4

Enter the user name and password on the password input window, then 
click [OK].

The factory default user name is “root” and the password is “system”.
The projector control screen appears.

The projector can be controlled from this screen.

The factory default IP address is “192.168.254.254” for wired connections and 
“192.168.253.254” for wireless connections. If DHCP settings are used, ask the network 
administrator for the projector IP address. It is possible to check the IP address from the 
projector menu (

P161

).

Summary of Contents for 4K6021Z

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands