173
Using the Projector on a Network
Ad
va
nc
ed
G
uid
e
Using
the
Pr
oje
ctor
on a Networ
k
IPv6
address
IPv6
Specify on or off for the
wireless LAN (IPv6) function.
Choosing OFF will prevent
you from configuring the
following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
OFF
Autoconfiguration Select on or off for the auto
setting function of the wireless
LAN (IPv6).
Choosing ON will prevent you
from configuring the following
settings.
[IP address]
[Prefix length]
[Default gateway]
ON
IP address
Enter the wireless LAN (IPv6)
IP address in 1-byte numbers.
<Blank>
Prefix length
Enter the wireless LAN (IPv6)
prefix length in 1-byte
numbers.
<Blank>
Default gateway
Enter the wireless LAN (IPv6)
default gateway address in 1-
byte numbers.
<Blank>
Wireless
setting
Wi-Fi Protected
Setup
Select a simple method of
establishing a wireless
connection.
None (Manual)
Mode
Select the wireless
connection mode.
infrastructure mode
Select SSID
Select the wireless access
point’s SSID. Click the
[Refresh] button to update the
list. If the SSID is not listed,
enter it in 1-byte
alphanumeric characters (1-
32 characters).
<Blank>
Security
Select the wireless security
setting.
Open
Channel
Shows the wireless channel
number. When [Mode] is set
to projector access point (PJ
AP) mode, a channel can be
selected.
1
Key ID
Select the wireless WEP key
ID.
1
Key type
Select the wireless security
key input type.
ASCII
Item
Explanation
Factory default setting
Summary of Contents for 4K600STZ
Page 17: ...17 Safety Instructions Safety Instructions ...
Page 74: ...74 ...