manualshive.com logo in svg

Canon 4K500ST, User Manual

Share
Download
Canon 4K500ST User Manual Download Page 30

30

Before Use

Remote Control

The remote control allows you to operate all functions of the projector.

(1) POWER button (

P60

, 

P79

)

Turns the projector on or off.

(2) ASPECT button (

P72

, 

P88

)

Changes the aspect ratio mode.

(3) Pointer buttons (

P85

)

Selects the upper, lower, left or right 
item in the menu. Also used to assign a 
channel to the remote control.

(4) OK button (

P86

)

Determines the item selected from the 
menu.

(5) ZOOM button (

P68

)

Adjusts the image size.
[ ] / [ ] buttons: 
Increase the image size.
[ ] / [ ] buttons: 
Decrease the image size.

(6) FOCUS button (

P67

)

Adjusts focusing.
[ ] / [ ] buttons: 
Moves the focus position further away.
[ ] / [ ] buttons: 
Moves the focus position nearer.
By pressing the 

FOCUS

 button twice, 

you can also adjust the focus at image 
edges (

P157

), depending on the 

[Marginal focus] setting (

P102

).

(7) TEST PATTERN button (

P107

)

Displays the test pattern.

(8) D.ZOOM button

Not used with this product.

(9) Ch button (

P113

)

Changes the remote control channel 
when the remote control is used via the 
infrared transmitter.

(10) IMAGE button (

P76

)

Switches the image mode (image 
quality).

(11) AUTO PC button

Not used with this product.

(12) INPUT button (

P63

)

Switches the input signal.

(1)

(2)

(3)

(4)

(5)

(7)

(6)

(8)

(9)

(11)

(12)

(10)

Summary of Contents for 4K500ST






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands