![background image](http://html.mh-extra.com/html/canon/4k500st/4k500st_user-manual_62434163.webp)
163
Maintenance
Ot
her
In
fo
rm
at
ion
Ma
in
te
na
nc
e
6
Align the filter cover tab with the
groove and close the filter cover.
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•
Only the [ ], [ ],
OK
,
POWER
,
EXIT
,
FOCUS
,
ZOOM
and
SHIFT
buttons are
available while this screen is displayed.
•
When you press the
POWER
button, “Push POWER button again to turn off
power.” message appears.
•
After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
•
This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• We recommend cleaning or replacing the air filter (part no: RS-FL03) when you replace
the lamp.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part number: RS-FL03
• This can also be purchased from the Canon website.