Canon 4345B001, User Manual

Page: 61 / 180

Using the Face Self-Timer
61
To take a photo that includes the photographer, such as a group photo,
compose the shot and press the shutter button. The camera will shoot three
times approximately two seconds after you enter the shot and it detects your
face (p. 84).
Choose .
∆
Follow Steps 1 – 2 on p. 54 to choose ,
then press the
n
button for more than
one second.
∆
Press the
qr
buttons or turn the
–
dial to
choose , then press the
n
button.
Compose the shot and press the
shutter button halfway.
∆
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
In the screen that appears in Step 1, press the
op
buttons to change the number
of shots and press the
n
button to make the setting.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Changing the number of shots
Using the Face Self-Timer
COP
Y