Canon 4345B001 Page 30 User Manual Download

Page: 30 / 180

Shooting Movies

Recording will start, and [ Rec] and the
elapsed time will appear on the screen.

∆

Once shooting begins, take your finger off
the shutter button.

∆

If you change the composition of your shot
during shooting, the focus, brightness and
tone will automatically adjust.

∆

You can also zoom in and out with the
zoom lever during shooting.

∆

Do not touch the microphone while
shooting.

∆

Operation sounds, other than pressing the
shutter button, will be recorded in the
movie.

Finish shooting.

∆

Press the shutter button fully again.

The camera will beep once and stop
shooting the movie.

The movie will record to the memory card.

Shooting will automatically stop when the
memory card fills.

Estimated Shooting Times

•

Shooting times are based on default settings.

•

Maximum clip length is approx. 10 minutes.

•

Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.

Elapsed Time

Microphones

Memory Card

4 GB

16 GB

Shooting Time

20 min. 43 sec.

1 hr. 24 min. 54 sec.

COP

Summary of Contents for 4345B001





















































































































































































Search results

Summary of Contents for 4345B001

Reviews:

Related manuals for 4345B001

Brands by name

Popular brands

Canon 4345B001, User Manual

Search results

Summary of Contents for 4345B001

Reviews:

Related manuals for 4345B001

Brands by name

Popular brands