manualshive.com logo in svg

Canon 4344B005, User Manual

Share
Download
Canon 4344B005 User Manual Download Page 121

121

When there are many images on the memory card, you can filter and display 
them by a specified filter. You can also protect 

(p. 129)

 or delete 

(p. 132)

 all 

images at once while filtered.

Search 

by , ,  

and 

Choose a target filter.

●

In single image playback, press the 

d

 

button, then press the 

op

 buttons to 

choose a jump method.

●

In ,  

or , 

press 

the 

qr

 buttons to 

choose a filter. Turning the 

Â

 dial will 

display only images that match the filter of 
the chosen target image.

●

Press the 

l

 button to switch between 

Information Display and No Information 
Display.

●

Pressing the 

n

 button restores single 

image playback.

View the filtered images.

●

Pressing the 

m

 button will start filtered 

playback, and the jump method and a 
yellow frame will appear.

●

If you press the 

qr

 buttons or turn the 

Â

 

dial, the chosen target images will display.

●

If you press the 

d

 button, [Filtered 

playback settings cleared] appears. 
Pressing the 

m

 button cancels filtered 

playback.

Jump to Favorites

Displays images tagged as favorites 

(p. 134)

.

Jump Shot Date

Displays the images shot on a specified date.

Jump to My Category

Displays the images of a specified category 

(p. 135)

.

Jump to Still/Movie

Displays only still images or movies.

Jump 10 Images

Jumps over 10 images at a time.

Jump 100 Images

Jumps over 100 images at a time.

Viewing Images in Filtered Playback

Target Filters

Summary of Contents for 4344B005




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands