Canon 4343B001 Page 85 User Manual Download

Page: 85 / 196

You can change the tone of an image to sepia or black and white when
shooting.

Choose My Colors.

●

After pressing the

button, press the

buttons to choose

Choose an option.

●

Press the

buttons or turn the

dial to

choose an option, then press the

button.

The setting will appear on the screen.

Changing the Tone of an Image (My Colors)

My Colors Off

—

Vivid

Emphasizes the contrast and color saturation for a vivid
impression.

Neutral

Tones down the contrast and color saturation for neutral
hues.

Sepia

Sepia tones.

B/W

Black and white.

Positive Film

Combines the effects of Vivid Red, Vivid Green and Vivid
Blue to produce intense natural appearing colors like those
obtained with positive film.

Lighter Skin Tone

Makes skin tones lighter.

Darker Skin Tone

Makes skin tones darker.

Vivid Blue

Emphasizes blue tints. Makes the sky, ocean and other
blue subjects more vivid.

Vivid Green

Emphasizes green tints. Makes mountains, foliage and other
green subjects more vivid.

Vivid Red

Emphasizes red tints. Makes red subjects more vivid.

Custom Color

You can adjust contrast, sharpness, and color saturation
etc. to your preference (p. 86).

•

Not available when shooting in

•

The white balance cannot be set in the

and

modes (p. 82).

•

and

modes, colors other than people’s skin color may change.

You may not obtain the expected results with some skin colors.

COP

Summary of Contents for 4343B001





































































































































































































Search results

Summary of Contents for 4343B001

Reviews:

Related manuals for 4343B001

Brands by name

Popular brands

Canon 4343B001, User Manual

Search results

Summary of Contents for 4343B001

Reviews:

Related manuals for 4343B001

Brands by name

Popular brands