102
Changing Camera Settings
You can customize convenient and commonly used functions from the
3
tab (p. 45).
●
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
●
Choose [Start-up Image], then press the
qr
buttons to choose [Off].
●
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
●
Choose [File Numbering], then press the
qr
buttons to choose an option.
Continuous
Even if you shoot using a new
memory card, the file numbers
are assigned consecutively until
an image with the number 9999
is taken/saved.
Auto Reset
If you replace the memory card
with a new one, or a new folder
is created, file numbering
begins with 0001 again.
•
If you use a memory card already containing images, the newly
assigned file numbers may continue the existing numbering for both the
[Continuous] and [Auto Reset] settings. If you want to start over with file
number 0001, format the memory card before use (p. 20).
•
Refer to the
Software Guide
for information regarding folder structure or
image types.
CO
PY
Summary of Contents for 4258B001
