Canon 4192B001 Page 32 User Manual Download

Page: 32 / 180

Shooting Movies

Recording will start, and [ Rec] and the
elapsed time will appear on the screen.

●

Once shooting begins, take your finger off
the shutter button.

●

If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.

●

Do not touch the microphone while
shooting.

●

Do not press any buttons other than the
shutter button while shooting. The sound
the buttons make will be recorded in the
movie.

Stop shooting.

●

Press the shutter button fully again.

The camera will beep once and stop
shooting the movie.

The movie will record to the memory card.

Shooting will automatically stop when the
memory card fills.

Estimated Shooting Times

•

Shooting times are based on default settings.

•

Maximum clip length is approx. 10 minutes.

•

Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.

Elapsed Time

Microphone

Magnifying the subject while shooting

Pressing the zoom lever toward

while shooting will zoom in on the subject.

However, operation sounds will be recorded and the movie may appear coarse.

Memory Card

4 GB

16 GB

Shooting Time

21 min. 23 sec.

1 hr. 27 min. 37 sec.

Summary of Contents for 4192B001





















































































































































































Search results

Summary of Contents for 4192B001

Reviews:

Related manuals for 4192B001

Brands by name

Popular brands

Canon 4192B001, User Manual

Search results

Summary of Contents for 4192B001

Reviews:

Related manuals for 4192B001

Brands by name

Popular brands