Canon 4192B001, User Manual

Page: 62 / 180

62
Using the Face Self-Timer
Using the Face Self-Timer
To take a photo that includes the photographer, such a group photo,
compose the shot, and press the shutter button. The camera will shoot
approximately two seconds after you enter the shot and it detects your face
(p. 84).
Choose .
●
Choose in Steps 1 – 2 on p. 54, then
touch .
●
Touch , then touch
Ú
.
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X
The lamp will blink and the self-timer
sound will play.
Changing the number of shots
After touching on the screen in Step 1, touch
op
to change the number of
shots. Touch
Ú
to complete the setting.
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately 15
seconds later.
•
If there are no people in the shot when the shutter button is pressed
fully, the camera will shoot after a person enters the shot and winks.
CO
PY