Video
71
To fade in/out
Activate the selected fader in record pause mode (
), then press
to start recording with a fade in. Activate the selected
fader while recording (
), then press
to fade out and
pause the recording.
To activate an effect
mode: Activate the selected effect while recording or in record
pause mode.
mode: Activate the selected effect and then press
to
record the photo.
NOTES
• When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally.
• The camcorder retains the last setting used even if you deactivate the
selected digital effect or change the recording program.
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
On-Screen Displays and Data Code
You can turn most on-screen displays on or off.
Repeatedly press
to turn the on-screen displays on/off in the
following sequence:
,
mode:
• All displays on
• Most displays off*
• Full-screen display** (
)
mode:
• All displays on
• Data code only
• All displays off
START/STOP
START/STOP
PHOTO
Operating modes:
DISP.
CO
PY
