Canon 3818B002 - Rebel T1i 15.1 MP Digital SLR Instruction Manual Download Page 92

Page: 92 / 244

Registering a Picture Style

Select a parameter.

Select a parameter such as
[

Sharpness

], then press <

Set the parameter.

Press the <

> key to adjust the

parameter as desired, then press
<

For details, see “Customizing a
Picture Style” on pages 88-90.

Press the <

> button to register

the new Picture Style. The Picture
Style selection screen will then
reappear.

The base Picture Style will be
indicated on the right of [

User Def. *

The name of the Picture Style having
any modified settings (different from
the default) registered under [

User

Def. *

] will be displayed in blue.

If a Picture Style has already been registered under [

User Def. *

], changing

the base Picture Style in step 4 will nullify the parameter settings of the
registered Picture Style.

To shoot with the registered Picture Style, follow step 2 on page 73 to select
[

User Def. *

] and then shoot.

COP

Summary of Contents for 3818B002 - Rebel T1i 15.1 MP Digital SLR





















































































































































































































































Search results

Summary of Contents for 3818B002 - Rebel T1i 15.1 MP Digital SLR

Reviews:

Canon 3818B002 - Rebel T1i 15.1 MP Digital SLR, Instruction Manual, Page: 92 / 244

Search results

Summary of Contents for 3818B002 - Rebel T1i 15.1 MP Digital SLR

Reviews: