manualshive.com logo in svg

Canon 3670C005, Instruction Manual

Share
Download
Canon 3670C005 Instruction Manual Download Page 107

107

Menu Option

s

* Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.

[Auto Power Off]

[

i

 On]

, [

j

 Off]

In order to save power when the camcorder is powered by a battery pack, when this setting is set to 
[

i

 On], the camcorder will automatically shut off if left without any operation for 5 minutes.

• Approximately 30 seconds before the camcorder shuts off, the message [Auto Power Off] will 

appear.

[REMOTE Terminal]

[

 RC-V100 (REMOTE A)], 

[

 

Standard]

(

A

 7

9

)

[Assignable Button 1] to
[Assignable Button 5]

Following are the default settings for each assignable button. For a complete list of the 
functions that can be assigned, refer to the detailed table.
1: 

[

B

 AF/MF]

, 2: 

[

±

 Powered IS]

, 3: 

[

z

 Pre REC]

, 4: 

[

 Rec Review]

, 

5:

[

^

 Magnification]

(

A

 84)

[Onscreen Assignable Button]

For a complete list of the functions that can be assigned, refer to the detailed table
(default: 

[

 Photo]

).

(

A

 84)

[CUSTOM Dial & Button]

[

 Tv / Av / M], [

 AGC Limit], [

y

 

Exposure Comp.], 

[

j

 Off]

(

A

 83)

[Battery Info]

—

Displays a screen where you can verify the battery charge (as a percentage) and the remaining 
recording time (

 mode) or playback time (

 mode).

• If the battery pack is depleted, the battery information may not be displayed.

[Backup Menu Settings 

7

]

[Save], [Load]

(

A

 8

6

)

[GPS Auto Time Setting]*

[

i

 

Auto Update], 

[

j

 Disable]

(

A

 80)

[GPS Information Display]*

—

When the optional GP-E2 GPS Receiver is attached to the camcorder, the following settings become 
available:
[GPS Auto Time Setting]: You can have the camcorder automatically set the time based on the 

information acquired from GPS. For more details, refer to 

Setting Time from GPS on the Camera

 

in the receiver's instruction manual.

[GPS Information Display]: Displays the current GPS information. For more details, refer to 

Viewing 

GPS Information

 in the receiver's instruction manual.

[Certification Information]

—

Displays certification logos that apply to this camcorder.

[Firmware]

—

Displays the current firmware version of the camcorder.
• This option is usually unavailable.

[Reset All]

[No], [Yes]

Resets all the camcorder's settings to default values/settings.

Menu item

Setting options and additional information

Summary of Contents for 3670C005
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands