Canon 3634B005 User Manual Download

Page: 92 / 144

Just like with exposure compensation (p. 67), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.

Choose

●

After pressing the

button, press the

buttons to choose

Make the setting.

●

Press the

buttons or turn the

dial

to choose the flash exposure
compensation, then press the

button.

will appear on the screen.

The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene. In
the

tab, if [Safety FE] in [Flash Settings] is set to [Off], the shutter speed and

aperture value will not automatically adjust.

Adjusting the Flash Exposure

Compensation

To set the flash exposure compensation, choose [Flash Settings] (p. 91)
from the

tab, then choose [Flash Exp. Comp] and press the

buttons to choose a setting (p. 48).

Safety FE

Summary of Contents for 3634B005

















































































































































Search results

Summary of Contents for 3634B005

Reviews:

Related manuals for 3634B005

Brands by name

Popular brands

Canon 3634B005, User Manual

Search results

Summary of Contents for 3634B005

Reviews:

Related manuals for 3634B005

Brands by name

Popular brands