Canon 3634B005 User Manual Download

Page: 70 / 144

Choose the ISO speed.

●

After pressing the

button, press the

buttons or turn the

dial to choose

an option, then press the

button.

•

Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.

•

Raising the ISO speed results in a faster shutter speed, reducing camera shake
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.

Changing the ISO Speed

Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.

Low

High

Fine weather conditions, outdoor shooting.

Cloudy,

Twilight

Nightscapes, Dark interiors

Changing the ISO speed

•

When the camera is set to

, you can press the shutter button halfway

to display the automatically set ISO speed.

•

With ISO 3200 you can set an even faster speed (p. 59).

Summary of Contents for 3634B005

















































































































































Search results

Summary of Contents for 3634B005

Reviews:

Related manuals for 3634B005

Brands by name

Popular brands

Canon 3634B005, User Manual

Search results

Summary of Contents for 3634B005

Reviews:

Related manuals for 3634B005

Brands by name

Popular brands