Canon 3633B005, User Manual

Page: 86 / 180

86
You can choose a specific person’s face to focus on and then shoot.
Set the camera to [Face Detect]
(p. 82).
Set Face Select mode.
●
Point the camera toward the face of the
subject and press the
button.
X
After [Face Select : On] displays, an
orange face frame
will appear around
the face detected as the main subject.
●
Even if the subject moves, the face frame
will follow the subject within a certain
range.
●
If a face is not detected, will not
appear.
Choose the face on which to focus.
●
If you press the
qr
buttons or turn the
 dial, the face frame will move to
another face detected by the camera.
●
If you press the
m
button or the
button, the frame around the chosen face
will turn white.
Shoot.
●
Press the shutter button halfway. The face
frame of the chosen face will change into
a green
.
●
Press the shutter button fully to shoot.
Pressing the
l
button will display the number of faces detected by the
camera (35 at the most) (orange: main subject’s face, white: detected face).
Choosing the Person to Focus On
(Face Select)
Frame
Confirming the number of detected faces
Pressing the
op
buttons in Step 3, and choosing , or holding down
the button in Step 4, will cancel Face Select mode.
CO
PY