Canon 3576B001, User Manual

Page: 131 / 164

Changing Shooting Functions
131
Turning off the AF Assist Beam
If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.
●
Select [AF-assist Beam], then press the
qr
buttons to select [Off].
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
●
Select [Review], then press the
qr
buttons to select an option.
●
If you select [Off], the image will not
display.
●
If you select [Hold], the image displays
until you press the shutter button halfway.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
●
Select [Review Info], then press the
qr
buttons to select an option.
Detailed Displays detailed information (p. 45).
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 103).
CO
PY