manualshive.com logo in svg

Canon 3556B001AA, Basic Operation Manual

Share
Download
Canon 3556B001AA Basic Operation Manual Download Page 137

9-7

Tr

oubleshooting

   4

  Remove the paper by pulling it gently. 

 

 

 Make sure that no paper is jammed inside the paper output guide, 
and then close it. 

  5 

  Remove the paper by pulling it gently. 

 

 

  6 

  Holding the tabs (A) on both sides, close the 

duplex unit. 

 Close the guide fi rmly until it clicks. 

 

(A)

(A)

 

  7  

Remove the paper by pulling it gently. 

 

 

  8  

Close the rear cover. 

 The machine is ready to print. 

  Paper Jams in the Output Area (MF8350Cdn 

Only)

 Referring to the procedure on the display, follow the steps 
below to remove jammed paper. 

 

Keys to be used for this operation

 

  1 

 Press 

[

]. 

 

Paper jam.
Press [

] to

display steps.

 

  2 

  Open the front cover. 

 

 

  3 

  Lift the scanning platform. 

 

 

  4 

  Remove the paper by pulling it gently. 

 

 

  5 

  Lower the scanning platform. 

Summary of Contents for 3556B001AA
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands