28 •
Video
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
POINTS TO CHECK
Stop the playback before using this
function.
[
END SEARCH]
[EXECUTE]
• [END SEARCH] appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick (
) toward
.
NOTES
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
On-Screen Displays (Data Code)
The camcorder keeps a data code
containing the date and time of
recording. You can select the data to be
displayed.
Options
Default value
[
MENU]
[
DISPLAY SETUP/
]
[DATA CODE]
Desired option
switch:
FUNC.
switch:
[
OFF]
No data code display.
[
DATE], [
TIME]
Displays the date or time when the scene was
recorded.
[
DATE & TIME]
Displays both the date and time of the recording.
FUNC.
FUNC.
