Canon 3508B001 - PowerShot D10 Digital Camera, User Manual

Page: 91 / 163

91
You can change the look of an image when shooting. However, the shooting
conditions may cause the image to become coarse, or the colors may not
come out as expected.
T Color Accent
You can select to retain a single color and change the rest to black and white
in a composition.
Select
T
.
●
Follow Step 2 on p. 56 to select
T
.
Press the
l
button.
●
The unchanged image and the Color
Accent image will both display.
●
The color for default settings is green.
Specify the color.
●
Position the center frame so it is filled with
the color you want and press the
q
button.
The specified color will be recorded.
Specify the range of colors.
●
Press the
op
buttons to change the
range of colors to be retained.
●
Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
●
Pressing the
l
button accepts the
setting and restores the shooting screen.
Changing the Color and Shooting
Recorded color
•
Using the flash may cause unexpected results in this mode.
•
The recorded color will be saved even if you turn off the power.
(EC256)_CDI-E404_Guide_E.book Page 91 Friday, February 6, 2009 7:44 PM
CO
PY