Canon 3508B001 - PowerShot D10 Digital Camera User Manual Download Page 88

Page: 88 / 163

You can automatically correct red eyes in images taken with the flash.

Select [Flash Settings].

●

Press the

button, select [Flash

Settings] from the

tab and press the

button.

Adjust the setting.

●

Press the

buttons to select [Red-Eye

Corr.] and press the

buttons to select

[On].

will appear on the screen (p. 44).

Red-Eye Correction

Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.

•

You can correct recorded images (p. 123).

•

If you press the

button as shown on the screen in Step 2 and then

press the

button, the Flash Settings screen will display.

(EC256)_CDI-E404_Guide_E.book Page 88 Friday, February 6, 2009 7:44 PM

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera




































































































































































Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Canon 3508B001 - PowerShot D10 Digital Camera, User Manual, Page: 88 / 163

Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews: