Canon 3508B001 - PowerShot D10 Digital Camera User Manual Download Page 16

Page: 16 / 163

Use the included charger to charge the battery.

Remove the cover.

Insert the battery.

●

Align the marks on the battery and
charger, then insert the battery by sliding it
in

and down

Charge the battery.

●

For CB-2LY: Flip out the plug

and plug

the charger into a power outlet

●

For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.

●

The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.

Remove the battery.

●

Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in

and up

Charging the Battery

To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.

(EC256)_CDI-E404_Guide_E.book Page 16 Friday, February 6, 2009 7:44 PM

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera




































































































































































Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands

Canon 3508B001 - PowerShot D10 Digital Camera, User Manual

Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands