Canon 3508B001 - PowerShot D10 Digital Camera User Manual Download Page 143

Page: 143 / 163

143

You can change the front cover using the Front Cover Set FC-DC1 (Sold
Separately).

Remove the screws.

●

Using the tool included in the accessory
set, remove the two screws.

●

Take care not to lose the screws.
However, spare screws are included with
the accessory set.

Remove the front cover.

●

Using the removal tab, lift the cover in the
direction of the arrow to remove.

Put on a new cover.

●

Place the desired cover as shown in the
image, and press it until it clicks into
place.

●

Make sure there is no space between the
front cover and the camera.

Screw in the cover.

●

Replace the screws removed in Step 1.

Changing the Front Cover

Removal tab

Do not remove other screws besides the two on the front cover.

(EC256)_CDI-E404_Guide_E.book Page 143 Friday, February 6, 2009 7:44 PM

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera




































































































































































Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands

Canon 3508B001 - PowerShot D10 Digital Camera, User Manual

Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands