Canon 3508B001 - PowerShot D10 Digital Camera User Manual Download Page 107

Page: 107 / 163

107

You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.

Press the

button, and switch

to the focus check display (p. 45).

A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.

Change the magnification level or
location.

●

Press the

button once.

●

Use the

button to change the

display size, and the

opqr

buttons to

change the display position while
checking the focus.

Switch frames.

●

Pressing the

button will switch to a

different frame.

●

Pressing the

button resets the

display to Step 1.

Checking the Focus

(EC256)_CDI-E404_Guide_E.book Page 107 Friday, February 6, 2009 7:44 PM

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera




































































































































































Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands

Canon 3508B001 - PowerShot D10 Digital Camera, User Manual

Search results

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera

Reviews:

Related manuals for 3508B001 - PowerShot D10 Digital Camera

Brands by name

Popular brands