manualshive.com logo in svg

Canon 3508B001 - PowerShot D10 Digital Camera, User Manual, Page: 103 / 163

Share
Download
Canon 3508B001 - PowerShot D10 Digital Camera User Manual Download Page 103

103

When there are many images on the memory card, you can filter and display 
them by a specified condition. You can also delete (p. 110) or protect 
(p. 114) all images at once in the filtered condition.

Setting the Conditions

●

In Single Image Playback, press the 

o

 

button.

●

Press the 

op

 buttons and select a jump 

method.

●

If you press the 

l

 button, you can 

switch Information Display on or off.

Search 

by , ,  

and 

Select a target filter.

●

Use the 

qr

 buttons to select a filter 

(excluding ).

●

Pressing the 

n

 button restores the 

single image display.

d

 Viewing Images in Filtered Playback

Jump Shot Date

Displays the images shot on the specified date.

Jump to My Category

Displays the images of the specified category 
(p. 116).

Jump to Folder

Displays the images in a specified folder.

Jump to Movie

Jumps to a movie.

Jump 10 Images

Jumps over 10 images at a time.

Jump 100 Images

Jumps over 100 images at a time.

Target Filters

(EC256)_CDI-E404_Guide_E.book  Page 103  Friday, February 6, 2009  7:44 PM

CO

PY

Summary of Contents for 3508B001 - PowerShot D10 Digital Camera




































































































































































Reviews:

No comments