Canon 3444B001 User Manual Download Page 23

Page: 23 / 132

You can view your images on the screen.

Select the playback mode.

●

Press the

button.

The last image you took will appear.

Select an image.

●

Pressing the

button will cycle through

the images in reverse order.

●

Pressing the

button will cycle through

the images in the order they were taken.

●

The images change more quickly if you
keep the

buttons pressed, but they

will appear coarse.

●

Pressing the

button while the lens is

extended will cause the shooting screen
to reappear.

●

The lens will retract after approximately 1
minute elapses. If you press the

button

with the lens retracted, the power will turn
off.

Pressing the

button while the camera is off turns the camera on in playback

mode. Pressing it again turns the camera off. Pressing the shutter button halfway
while in playback mode causes the shooting screen to reappear.

Viewing Images

Switching to and from playback mode

Summary of Contents for 3444B001





































































































































Search results

Summary of Contents for 3444B001

Reviews:

Related manuals for 3444B001

Brands by name

Popular brands

Canon 3444B001, User Manual

Search results

Summary of Contents for 3444B001

Reviews:

Related manuals for 3444B001

Brands by name

Popular brands