![background image](http://html.mh-extra.com/html/canon/3288b002/3288b002_user-manual_62429027.webp)
27
Part Names
Be
fo
re
Us
e
Input Terminals
(1) HDMI IN Terminal (
Receives a digital content image sig-
nal (HDMI).
Carries both video and audio signals
across a single cable.
(2) ANALOG PC-1/DVI-I IN Input Terminal
(
DVI-I IN) (
,
Connects an external monitor output
from a computer.
Receives an analog PC (ANALOG
PC-1) or a digital signal (DIGITAL PC).
(3) ANALOG PC-2/COMPONENT IN Terminal
(
/COMPONENT IN) (
,
)
Receives an analog PC signal (ANA-
LOG PC-2).
Use a supplied component cable to
receive a component image signal
(COMPONENT).
(4)
AUDIO IN Terminal (
The audio input terminals correspond-
ing to 3 image input systems other
than HDMI-IN. Each terminal receives
the audio signal corresponding to
"DIGITAL PC/ANALOG PC-1", "ANA-
LOG PC-2/COMPONENT", and
"VIDEO" from the left. The internal
speaker outputs the audio signal for
the selected image signal.
(5)
AUDIO OUT Terminal (
,
The audio output terminal to output an
audio to external AV equipment. It out-
puts the audio signal corresponding
to the projected image signal.
(6) VIDEO IN Terminal (
)
Receives a composite video signal
from AV equipment.
(7) Service port (CONTROL)
Exclusively used by the service per-
sonnel (it is not used normally).
(8) LAN port (
)
Connects a LAN cable.
Used to connect the projector to the
network.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)