Canon 3114C008 Online Manual Download Page 71

Page: 71 / 480

Paper Sources

The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B).

You can load all supported paper on the rear tray.

Supported Media Types

You can load A4, B5, A5, or Letter-sized plain paper in the cassette.

Note

• When printing, select the correct page size and media type. If you select the wrong page size or media

type, the printer may feed paper from the wrong paper source or may not print with the proper print
quality.

For details on how to load paper in each paper source, see below.

Loading Paper in the Rear Tray
Loading Paper in the Cassette
Loading Envelopes in Rear Tray

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 71 / 480

Search results

Summary of Contents for 3114C008

Reviews: