Canon 3114C008 Online Manual Download Page 358

Page: 358 / 480

Cannot Proceed beyond Printer Connection Screen

If you cannot proceed beyond the

Printer Connection

screen, check the following.

Check1

Make sure USB cable is securely plugged in to printer and computer.

Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the
back of the printer.

Important

• Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the

instruction manual supplied with the USB cable.

Check2

Follow procedure below to connect printer and computer again.

Important

• For macOS, make sure the lock icon is on the lower left of the

Printers & Scanners

screen.

If the

icon (locked) is displayed, click the icon to unlock. (The administrator name and the password

are necessary to unlock.)

1. Unplug USB cable from printer and computer and connect it again.

2. Make sure no printer operation is in progress and turn off.

3. Turn on printer.

Check3

If you cannot resolve problem, follow procedure below to reinstall printer driver.

1. Finish setup.

358

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 358 / 480

Search results

Summary of Contents for 3114C008

Reviews: