manualshive.com logo in svg

Canon 3114C008, Online Manual, Page: 202 / 480

Share
Download
Canon 3114C008 Online Manual Download Page 202

Quiet setting

Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.
In addition, you can specify the time range to reduce the operating noise.

Important

• Set the current date and time in advance.

Setting Sender Information

Follow the procedure below to perform setting.

1.

Check that printer is turned on.

2.

Press the 

Setup

 button.

The 

Setup menu

 screen is displayed.

3.

Select 

Quiet mode

 and then press the 

OK

 button.

4.

Select 

ON

 or 

Specify hrs of use

 and then press the 

OK

 button.

• When 

ON

 is selected:

You can reduce the operating noise while printing is in progress.

• When 

Specify hrs of use

 is selected:

The screen to specify starting/ending time is displayed. Use the 

 button to move the cursor

under the desired position, use the Numeric buttons to enter the time, then press the 

OK

 button.

You can reduce the operating noise during the specified time.

Important

• Operating speed may be reduced compared to when 

OFF

 is selected.

• This function may not be so effective depending on the printer's setting. Furthermore, certain

noise, such as when the printer is preparing for printing, is not reduced.

Note

• You can set the quiet mode from the operation panel of the printer, the printer driver, or ScanGear

(scanner driver). No matter how you set the quiet mode, the mode is applied when you perform
operations from the operation panel of the printer or printing and scanning from the computer.

202

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Reviews:

No comments