Canon 3114C008 Online Manual Download Page 149

Page: 149 / 480

Transporting Your Printer

When relocating the printer for changing your living place or repairing it, make sure of the following.

Important

• You cannot take ink out of ink tanks.

• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the

tank cap properly.

• Prepare for transporting the printer with the print head attached. This allows the printer to automatically

cap the print head, thus preventing it from drying.

• Do not remove the print head. Ink may leak.

• If ink stains the inside of the printer, wipe them using a soft cloth dampened with water.

• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• Do not tilt the printer. Ink may leak.

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as

the printer may be damaged and ink in the printer may leak.

Press the

Setup

button, use the button to select

Maintenance

, and press the

button.

LCD and Operation Panel

Use the button to select

Transport mode

and press the

button.

Use the button to select

Yes

and press the

button.

If you do not want to enter the transporting mode, select

149

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 149 / 480

Search results

Summary of Contents for 3114C008

Reviews: