manualshive.com logo in svg

Canon 3114C008, Online Manual, Page: 103 / 480

Share
Download
Canon 3114C008 Online Manual Download Page 103

Note

• If the error message appears on the LCD after the scanning unit / cover is closed, take

appropriate action.

When Error Occurred

• The printer may make noise during operation.

Notes on ink bottles

Important

• Keep out of reach of children.
• Do not drink ink.
• If ink is accidentally licked or swallowed, rinse out your mouth or drink one or two glasses of water

and obtain medical advice immediately. If ink gets into your eyes, flush them with water right away,
and obtain medical advice immediately.

• If ink gets on your skin, wash the area with soap and water immediately. If irritation to your skin

persists, obtain medical advice immediately.

• When you store ink bottles, close bottle caps completely and place bottles in standing position. If the

ink bottles are laid down, ink may leak.

• When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.
• Ink may stain clothes or other belongings permanently. Washing may not remove ink stains.
• Do not use ink bottles and ink contained therein except to refill tanks of printers specified by Canon.
• Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in a

car. Bottles may warp and cause ink leakage or ink may become poor quality.

• Do not subject ink bottles to impacts. Ink bottles may be damaged or bottle caps may come off by

such impact, and ink may leak.

• Do not transfer ink to other containers. This may result in accidental ingestion, inappropriate use, or

poor ink quality.

• Do not mix ink with water or other ink. This may damage the printer.
• Once an ink bottle has been opened, do not leave it with bottle cap off. Ink will dry out, possibly

preventing proper operation of the printer when an ink tank is refilled using this bottle.

• To obtain optimum print quality, we recommend to refill the ink tank with ink up to the upper limit line

at least once a year.

103

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Reviews:

No comments