Canon 2711B054AA - imageCLASS D480 Laser All-in-One Printer, Basic Operation Manual, Page: 107 / 246

Fax
5-10
Introduction to Using Fax Functions
Selecting the Receive Mode Selecting the Receive Mode
You can set the fax receive mode to suit your needs.
The default setting is <FaxOnly>.
1
Press [Menu].
2
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
5 F A X S E T T I N G S
M E N U
3
Press [ ] or [ ] to select <RX MODE>,
then press [OK].
1 R X M O D E
F A X S E T T I N G S
4
Press [ ] or [ ] to select the desired
receive mode, then press [OK].
F a x O n l y
R X M O D E
For <FAX/TEL> and <DRPD>, you can specify
optional settings.
■
If you select <FAX/TEL>:
①Press [ ] or [ ] to select <RING
START TIME>, then press [OK].
1 R I N G S T A R T T I M E
F A X / T E L O P T . S E T
②Press [ ] or [ ] to specify the
duration (4 to 30 seconds) for which the
machine attempts to detect the fax tone
before it starts ringing, then press [OK].
6 S E C
R I N G S T A R T T I M E
If the machine receives a fax, the machine does
not ring and switches to the receive mode
automatically.
The default setting is <6SEC>. –
–
③Press [ ] or [ ] to select <F/T RING
TIME>, then press [OK].
2 F / T R I N G T I M E
F A X / T E L O P T . S E T
④Press [ ] or [ ] to specify the
duration (10 to 45 seconds) of ringing,
then press [OK].
2 2 S E C
F / T R I N G T I M E
The default setting is <22SEC>.
⑤Press [ ] or [ ] to select <F/T
SWITCH ACTION>, then press [OK].
3 F / T S W I T C H A C T I O N
F A X / T E L O P T . S E T
⑥Press [ ] or [ ] to select the action
the machine will take after the ringing
ends, then press [OK].
R E C E I V E
F / T S W I T C H A C T I O N
<RECEIVE>: Receives a fax.
<DISCONNECT>: Disconnects the call.
■ If you select <DRPD>:
①Press [ ] or [ ] to select a ring
pattern, then press [OK].
N O R M A L R I N G
D R P D : S E L E C T F A X
–
–
5
Setting the Current Date and Time
1
2
3
4
5