Canon 2711B019AB, Basic Operation Manual, Page: 78 / 242

Cop
ying
4-9
Adjusting Density
Adjusting Manually
You can adjust the density to the most appropriate
level for the document manually.
1
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2
Press [COPY].
3
Press [Density] to select the
manual mode.
4
Press [ ] or [ ] to adjust the copy
density, then press [OK].
- L T D K +
D E N S I T Y
[ ]: to make light documents darker
[ ]: to make dark documents lighter
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as
[FAX], all settings will
be canceled. If you want to keep the settings,
set the density as follows:
[Menu]
→
<COPY SETTINGS>
→
<STANDARD
SETTINGS>
→
<DENSITY>
→
<MANUAL> (See
“COPY SETTINGS,” on p. 12-5.)
–
–
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
T E X T / P H O T O 1
1 0 0 % A 4
6
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].