background image

Video

 • 29

NOTES

• The zoom range of the advanced zoom 

will change depending on the aspect 
ratio of the scene 

(

63).

 The advanced 

zoom cannot be selected if 
[WIDESCREEN] is set to [

OFF]. 

Selecting the Zoom Speed

Options



 Default value

 

[

 MENU] 

 

[

 

CAMERA  SETUP] 

 

[ZOOM SPEED] 

 

Desired option 

NOTES

The fastest zoom speed can be achieved 
with the [

 VARIABLE] setting.

Using the Zoom

Move the zoom lever toward

 

W

 

to 

zoom out (wide-angle). Move it 
toward 

T

 to zoom in (telephoto).

NOTES

Keep at least 1 m to the subject. At full 
wide-angle, you can focus on a subject as 
close as 1 cm.

Quick Start Function

When you press 

 the 

camcorder enters the 

 standby mode. 

In standby mode the camcorder 
consumes only about half the power 
used when recording, saving energy 
when you are using a battery pack. 
Additionally, when you press 

[WIDESCREEN] set to [

 ON] (16:9) 

 45x*, 

 41x**, 

 36x**

* The picture angle will be wider at both full 

telephoto and full wide-angle.

**The picture angle will be wider at full 

wide-angle.

[WIDESCREEN] set to [

 OFF] (4:3)

 46x, 

 Not 

available

(

18)

[

 

VARIABLE]



The variable zoom speed depends on how you 
operate the zoom lever: Press gently for slower 
zooms; press harder for faster zooms. With this 
option, the zoom speed will be faster in record 
pause mode.

[

 SPEED 1], [

 SPEED 2], 

[

SPEED 3]

Constant zoom speeds. [

 SPEED 3] is the 

fastest, and [

 SPEED 1] is the slowest.

FUNC.

(

19)

(

18)

FUNC.

FUNC.

W  

Zoom out

Zoom in

T

  

QUICK START

CO

PY

Summary of Contents for 2691B001
























































































Reviews: