Canon 2686B001 Instruction Manual Download Page 77

Page: 77 / 110

[

ADVANCED] when [WIDESCREEN] is set to [

OFF].

Option available only when the recording program is set to [

PROGRAM AE].

Option available only when the drive mode is set to [

SINGLE].

[IMG STAB]:

The image stabilizer compensates for camcorder shake even at full

telephoto.
• The image stabilizer is designed to compensate for a normal degree of camcorder

shake.

• We recommend setting the image stabilizer to [

OFF] when using a tripod.

[WIDESCREEN]:

The camcorder uses the full width of the image sensor providing high-

resolution 16:9 recordings.
• Since the screen on the camcorder has an aspect ratio of 16:9, recordings with a 4:3

aspect ratio will appear in the center of the screen with black sidebars.

•

Playing back a widescreen recording:

TV sets compatible with the Video ID-1 system

will automatically switch to wide (16:9) mode. Otherwise, change the aspect ratio of the
TV manually. To play back on a TV with normal aspect ratio (4:3) change the [TV TYPE]
setting accordingly (

80).

• The setting will not change even if you set the camcorder to

mode.

[FOCUS PRI.]:

When the focus priority is activated, the camcorder records a still image

only after the focus has been adjusted automatically. You can also select which AF frames
to use.
[

ON:AiAF]: One or more AF frames out of the nine frames available are automatically

selected and the focus is fixed on them.
[

ON:CENTER]: A single focusing frame appears in the center of the screen and the

focus is automatically fixed on it.
[

OFF]: No AF frame will appear and the still image will be recorded immediately after

you press

• When the recording mode is set to [

FIREWORKS], focus priority is automatically

set to [

OFF].

[A.SL SHUTTER]:

The camcorder automatically uses slow shutter speeds to obtain

brighter recordings in places with insufficient lighting.
• The camcorder uses shutter speeds down to 1/30 (1/15 in

mode).

• The setting will not change even if you set the camcorder to

mode.

• If a trailing afterimage appears, set the slow shutter to [

OFF].

• If

(camcorder shake warning) appears, we recommend stabilizing the camcorder, for

example, by mounting it on a tripod.

[REVIEW]

[

OFF],

[

2 sec]

, [

4 sec],

[

6 sec], [

8 sec], [

10 sec]

–

Menu item

Setting options

PHOTO

Summary of Contents for 2686B001















































































































Search results

Summary of Contents for 2686B001

Reviews:

Related manuals for 2686B001

Brands by name

Popular brands

Canon 2686B001, Instruction Manual

Search results

Summary of Contents for 2686B001

Reviews:

Related manuals for 2686B001

Brands by name

Popular brands