Canon 2669B001, User Manual

Page: 126 / 179

]
Correcting Red-Eye Effect
126
Manual Correction
When the camera cannot automatically detect and correct red-eye, correct it manually.
Add a correction frame.
●
In Step 3 on p. 125, select [Add Frame]
and then press the
m
button.
Set the position and size.
●
Press the
opqr
buttons to move the
correction frame (green) to the red-eye section,
move the zoom lever to adjust the frame size
so that it surrounds only the red-eye section.
X
The area inside the frame will appear
enlarged in the lower right of the screen.
●
If you press the
m
button, the first frame
(white) will be fixed, and a new correction
frame will appear.
●
You can add up to 35 correction frames.
●
When you have set the frame positions
and sizes, press the
n
button, then
follow Steps 3 and 4 on p. 125.
Removing Frames
•
To remove a frame, in Step 3 on p. 125, select [Remove Frame] and then
press the
m
button.
•
Press the
qr
buttons or turn the
Â
dial to select a frame (green), then
press the m button.
•
When [Overwrite] in Step 4 on p. 125 is selected, the uncorrected image
is overwritten with the corrected data, erasing the original image.
•
Some images may not be properly corrected.
•
Repeatedly correcting the same image may cause the quality to deteriorate.
•
Protected images cannot be overwritten.
COP
Y