background image

72

Press the 

o

 button.

Select a menu item.

Press the 

op

 buttons to select a menu 

item, then press the 

m

 button.

Approximate Values for ISO Speed

Lowering the ISO speed results in crisper images. 

Raising the ISO speed results in a faster shutter speed and thus in reduced 
camera shake. The flash reaches a greater distance to the subject. However, 
images will be coarser.

Changing the ISO Speed

Automatically sets the optimal speed for shooting mode and shooting 
condition.
Automatically sets the optimal speed, not only for shooting mode and 
shooting condition, but also for subject or camera motion. Depending 
on the scene, the speed may be set higher than in ISO Auto, resulting in 
less subject blur and camera shake.

 

 

Low

High

Fine weather condition, outdoor shooting.

 

Cloudy, 
Twilight 
Night view
Dark indoor

Setting the optimal ISO Speed

When the camera is set to 

 or 

, you can press the shutter button 

halfway to display the automatically set ISO speed.

You can raise the ISO speed even higher with the ISO 3200 setting 
(p. 58).

(EC251) CDI-E388_Guide_E.book  Page 72  Monday, June 23, 2008  10:51 AM

CO

PY

Summary of Contents for 2667b001




















































































































































Reviews: