Canon 2667b001 User Manual Download Page 29

Page: 29 / 147

Shooting Movies

Shoot.

●

Press the shutter button fully. The camera
will start shooting the movie.

●

Once shooting begins, take your finger off
the shutter button.

[ REC.] and the elapsed time will appear
on the screen.

●

Do not touch the microphone while shooting.

●

Do not press any buttons other than the
shutter button. The sound that buttons
make will be recorded in the movie.

Stop shooting.

●

Press the shutter button fully again.

The camera will beep once and stop
shooting the movie.

The indicator will blink green while the
movie is recorded to the memory card.

Shooting will automatically stop when the
memory card fills.

Approximate Recording Time

•

Recording times are based on a camera at default settings.

•

Remaining time can be checked on the

screen

in Step 1.

Elapsed Time

Microphone

Memory Card

32 MB (supplied)

2 GB

8 GB

Recording Time

15 sec.

16 min. 47 sec.

1 hr. 7 min. 6 sec.

(EC251) CDI-E388_Guide_E.book Page 29 Monday, June 23, 2008 10:51 AM

Summary of Contents for 2667b001




















































































































































Search results

Summary of Contents for 2667b001

Reviews:

Related manuals for 2667b001

Brands by name

Popular brands

Canon 2667b001, User Manual

Search results

Summary of Contents for 2667b001

Reviews:

Related manuals for 2667b001

Brands by name

Popular brands