Changing Shooting Functions
122
Using the Auto Red-Eye Correction Function
This function automatically reduces red-eye. Only the corrected image will
be recorded to the memory card.
●
Select [Flash Settings], then press the
m
button.
●
Press the
op
buttons to select [Red-Eye
Corr.], then press the
qr
buttons to select
[On].
Turning off the Red-Eye Lamp
The lamp lights in order to reduce the red-eye effect that occurs when
shooting in dark conditions using the flash. You can turn off this function.
●
Select [Flash Settings], then press the
m
button.
●
Press the
op
buttons to select [Red-Eye
Lamp], then press the
qr
buttons to select
[Off].
•
Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
•
Depending on the image, red-eye may not be detected automatically
and correction may not be applied as you expected. If this occurs, select
in the
1
tab the [Red-Eye Correction] to apply correction (p. 105).
(EC251) CDI-E388_Guide_E.book Page 122 Monday, June 23, 2008 10:51 AM
CO
PY
