Canon 2503C002, User Manual

Page: 188 / 211

Projector Web Screen Menu
188
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can enter relevant comments such
as projector names and locations where projectors are installed so that the
information can be used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, see “Network Setting” (
P73 ).
Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, see
“Network Setting” (
P73 ). For information about PJLink, see “What is PJLink?”
( P170 ).
Item Explanation Factory default setting
Projector name Enter the projector name in 1-byte
alphanumeric characters and symbols
(1 – 63 characters). Canon Projector001
Comment Enter any relevant notes, such as
where the projector is installed. <Blank>
Some characters such as # cannot be used for [Projector name] and [Comment].